HANDS FREE. VERSATILE. TANDEM.

FIN DRIVE OR PROPELLER DRIVE KAYAK

The Vanhunks Sauger 12ft tandem fishing Kayak is standard fitted with two removable tool boxes, and this is where adaptability, stability, and versatility make the Sauger an exciting option for families, friends, and both recreational & professional fishers alike.

Remove the tool boxes and you can fit a fin drive or even two, transforming your kayak in a few easy steps. Adding a second fin drive increases your speed for when you’re charging hard, and allows both adventurers’ to be hands free and engaging in the fun.

Should you wish to add a propeller drive instead, not a problem. The Sauger is fully compatible with Fin Drive or Propeller Drive. You have multiple upgrade options in one kayak. A big draw card.

• Seating: Tandem
• Style: Sit on Top
• Roto-molded: 5mm Polyethylene Design
• Hardware: Marine Graded stainless steel fittings.
• Inserts: Brass
• Fin Drive Compatible
• Prop Drive Compatible
• Electric Motor Compatible

ADDITIONAL FEATURES AND EXTRA’S INCLUDED:

• 2 Two-Piece Paddle with three-position adjustment features. The shaft made of heavy-duty black EDC coated aluminum, built-in handgrips, and PVC anti-drip rings.
• 2 Tool Pods (double up as storage hatches)
• 2 Deluxe aluminum adjustable seats
• 2 Storage hatches
• 2 Molded-in side handles
• 3 Molded-in carry handles (front and back)
• 2 Drain plug
• 6 Scupper plugs
• 4 Integrated fishing rod holders
• 4 Accessory track rails
• 2 Adjustable Footrests
• 2 Molded-in tackle box holders
• 2 Cupholders
• Bungee cords at bow and stern tank well area (with 6 D-rings)
• Hand controlled rudder system.

OPTIONAL EXTRA’S NOT INCLUDED:

• Motor Mount
• Electric Motor
• Drive cover
• Fishfinder
• Fin Drive
• Prop Drive

KAYAK SPECIFICATIONS:

• Length: 365 cm / 12 ft
• Width: 88 cm / 34 inches
• Height: 35 cm / 13 inches
• Weight w/out drive: 32 kg / 71 lbs
• Weight with drive: 41 kg / 90 lbs
• Maximum Weight Capacity: 270 kg / 595 lbs

Q:

Is the kayak more or less stable with the triple keel hull design?

A:

The triple keel shape enhances stability in the water as now you have three main connecting points to the water. As the three keels settle into the water they act as anchor points to keep the kayak from swaying sideways. Tripple keel kayaks work incredibly well in calm conditions.

Q:

Does the triple keel slow the kayak down at all?

A:

The extra impact points of any triple keel craft definitely will create more friction but the keels are very slender in shape so there contact points to the water are minimal and as there is less contact to the water surface the friction is less and therefore doesn’t affect the kayaks speed too much.

Q:

Can I use the kayak as a single seater?

A:

The Sauger has four main molded positions on the deck. The seating positions have a higher and lower setting but unfortunately, these seating molds are permanent and cannot be adjusted therefore limiting the kayak to a tandem option. Should you wish to use the kayak as a single option please remember that you will have to offset the tilt created by the seat positions by placing a cooler and your fishing gear on the opposite side of the kayak.

Q:

How fast is the kayak?

A:

The average paddling speed is around 4,8 km an hour.

Q:

Would I be able to stand and fish on the Sauger?

A:

As mentioned above in question one the triple keel shape has immense stability as the two side keels act as stabilizers for the kayak. Once you are up and standing please remember to keep your knees slightly bent as this will assist with any side-to-side tilt movement the moving water may cause.

Q:

I see there is a Fish finder compartment, How would you install that?

A:

Under the kayak, there is a nylon slated protection plate that can be easily unscrewed. When you lift off the lid you will see four brass inserts and these are used to mount your transducer to the kayak. Once you have mounted the transducer you can run your cables up through the fish finder scupper port and onto the deck. Close the protection plate as this will ensure the longevity of the transducer beam. You can then choose to either mount the LCD screen on the accessory rail or on the toolbox.

Q:

Should I want to at some point upgrade my Sauger what drive options are there?

A:

Our drive box designs on the Fin Drive and the Prop Drive allow for both to fit perfectly into the Sauger by simply unscrewing the toolbox clips and removing the toolbox. Then insert the drive you want to use and fasten the clips to ensure that the drive box is securely in place as a loose fitting box will greatly affect the drive’s performance. Both Systems work equally well but the Prop Drive will be best suited in open sea conditions.

Q:

Can I mount a motor on the back of the kayak?

A:

The design of the Sauger doesn’t allow for a rear-mounted motor, but you can use a Side motor mount that connects to the kayak with a plated mount and butterfly clips. Behind the seat in the tank well area, you will see two molded grooves with three brass insert points on either side of the kayak. Place the side motor mount bar into the groove and once spaced correctly use the silver plates and butterfly screws to connect the bar into position.

Q:

Can I beach launch with the Sauger?

A:

That would depend entirely on the condition at the launch. If the swell is small and the water condition is calm, then a beach launch is entirely possible but large swell and choppy conditions would greatly affect the Sauger and make the launch uncomfortable. Keep in mind that the nose of the kayak is elevated but not lifted so water will flow over the nose if impacted by a wave and this will greatly slow your speed. When beach launching always take out the scupper plugs so that any surface water drains immediately.

Q:

Should I take out or leave the Scupper Plugs in?

A:

Due to its shape and design and the fact that it has high walls the scupper plug tubes will be long and not allow any water returns so by taking them out completely, you would guarantee quick drainage which would be a lot better than possible water damming. 

Q:

I see there is a rudder system, can I connect both the forward and rear hand rudders at the same time?

A:

Unfortunately, not. The rudder system is designed to work individually as if both were connected and if both paddlers try to operate the steering at the same time it could badly damage the rudder system. Choose a dedicated steering captain and set up the rudder as that person’s seating position.

• Always store kayak in a shaded area and out of direct sunlight.
• Do not hang your kayak through the handles.
• Store your kayak on the side with the weight evenly displaced.
• Do not tie or try to secure your kayak through the handles.
• To avoid warping, ensure your kayak’s weight displacement is even during storage.
• Do not over tighten your kayak, especially in hot conditions as this can distort your kayak’s shape.

WARRANTY POLICY

Vanhunks Boarding warrants that this product, when purchased from an authorized Vanhunks Boarding dealer by a retail customer, will be free from defects in materials and workmanship for 60-months from the date of purchase by the original retail customer. All hardware, inserts, and components carry a 12-month warranty. This warranty is solely for the benefit of the original retail purchaser and may not be assigned. For retail customer Limited Warranty claims, proof of purchase from an authorized Vanhunks Boarding dealer is required.

The warranty is valid only when the product is registered in the support section of www.vanhunksboarding.com within seven (7) days from the date of purchase.

The warranty is valid only when this product is used for normal recreational activities and does not cover products used in rental or commercial operations. Vanhunks will make the final warranty determination, which may require inspection and photos of the equipment, clearly showing the defect(s). If necessary, this information must be sent to the Vanhunks distributor in your country.

If a product is deemed defective by Vanhunks, the warranty covers the repair or replacement of the faulty product. However, Vanhunks will not be responsible for any costs, losses, or damages incurred due to the failure of this product’s use.

This warranty is void if any unauthorized repair, change, or modification has been made to any part of the equipment.

The warranty for any repaired or replaced equipment is effective from the date of the original purchase only.

The original purchase receipt must accompany all warranty claims. In addition, the name of the retailer and date of purchase must be clear and legible.

There are no warranties that extend beyond the warranty specified herein.

Any repair or replacement of any product under this Limited Warranty is not available for ordinary wear and tear, including scratches or paint chips, or any damage caused by misuse, abuse, unauthorized modification or repairs, accident, heat, excessive exposure to sunlight, excessive exposure to cold, improper handling, storage, maintenance or care; incorrect setup, use in commercial, rental or teaching environments; use in reef waves, shore break or off the water; any blow or impact with a hard object or any other irresponsible use.

THE PRECEDING LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF QUALITY, PERFORMANCE, WRITTEN, ORAL, OR IMPLIED, AND ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. IN NO EVENT SHALL VANHUNKS BOARDING BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, STATUTORY OR EXEMPLARY DAMAGES, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE including, without limitation, loss to property other than this product, loss of use of the said product, or other property or other economic losses.

Want to ask a question before you order?

Complete the form below: